Bolt-Tensioner-components-Metric-Range-Small171020219436.jpg

SBT Components - Metric

Similar to the imperial tensioner components, the Hi-Force metric spring return hydraulic bolt tensioners are also modular in design and can be adapted to another thread size, within the tensioner range, by purchasing individual components or a simple conversion kit. By changing the required components, Hi-Force SBT spring return bolt tensioners offer the user even greater versatility at an economical cost.

Tensioner models SBT3, SBT4 and SBT6 are available with two different bridge sizes, hence always check whether or not the required thread change is possible within the bridge size. DO NOT mix components and make sure that all components match up. A large bridge will require the usage of a long threaded puller to ensure sufficient thread engagement, as well as a large size nut rotating socket.

The table below provides all the information to select the components, comprising of short threaded adapter, load cell, small bridge, small nut rotating socket and tommy bar, to modify your existing tensioner to suit another bolt size. Changes are only possible within the same tensioner size. It is essential that all the components or selected conversion kits have the same suffix as the target tensioner size (i.e. B1, B2 or B3).

Examples:
To change from SBT3-M42B1 to SBT3-M48B1 would require conversion kit CKS3-M48B1 only.
To change from SBT3-M48B1 to SBT3-M52B2 would require conversion kit CKS3-M52B2 and bridge STS3-B2.

  • Use with SBT Metric Spring Return Tensioners

  • Modular design

  • Offers greater versatility

183202012534-Big.jpg
Bolt-Tensioner-components-Metric-Range-Big2032016135024.jpg

SBT Metric Bolt Tensioner  Component Specifications 

Complete Tensioner                                                     Individual components                                                             D & E

Note: Remember to check bridge compatibility for SBT3, SBT4 and SBT6 models when ordering components.