top of page
Electric-Driven-Pumps--General-Duty-High-Flow-Small215202075148.jpg

HEP3 Pumps

​

The HEP3 series two stage electric driven hydraulic pump range has all the features of the HEP2 series, but with an increased flow of 9 litres/min at low pressure and 1 litre/min at high pressure (up to 700 bar) these pumps are particularly useful when operating high tonnage or long stroke cylinders. These pumps are fitted with totally enclosed, fan cooled, low noise, electric motors, making them ideal for quiet in-works operation or outdoor site use in most environments.

​

  • Working pressure 700 bar

  • Two stage operation

  • 25 litre oil reservoir

  • Externally adjustable pressure relief valve

  • Manual valve with load holding feature fitted as standard (excl. 2-way valves)

  • Cable management features for cable/hose winding and stowage

  • Supplied as standard with pressure gauge and a robust roll frame

2482020112811-Big.jpg

Pumps

Note:

1) All 380/440V models are suitable for operation at 50Hz and 60Hz.

2) All 110/115 and 220/240 volt models are supplied to run at 50 Hz as standard, refer to the table for pumps with 60 Hz motor. 60 Hz models deliver approximately 15-20% higher flow rate.

3) To order pumps with low voltage solenoid valve with hand pendant controller, suffix the pump model with 'S'

4) Other configurations are available on request

HEP3 Pumps Specifications      
                   

Maximum Flow Rate inch3/min

bottom of page