Electric-Driven-Pumps--General-Duty-Medium-Flow-Small215202075247.jpg

HEP2 Pumps

The HEP2 series two stage electric driven hydraulic pump range offers a low pressure flow rate of 7 litres/min with automatic changeover to high pressure flow rate of 0.65 litres/min up to 700 bar with a choice of 110/115, 220/240 or 380/440 volt motor options. With 2, 3 or 4-way manual and electric solenoid valve options, the HEP2 series is suitable for a wide range of applications and is the most commonly selected Hi-Force electric pump. All HEP2 series pumps are also fitted with an externally adjustable pressure relief valve for easy adjustment up to the maximum working pressure of 700 bar.

  • Working pressure 700 bar

  • Two stage operation

  • Choice of 10 or 25 litre oil reservoir

  • Externally adjustable pressure relief valve

  • Manual valve with load holding feature fitted as standard (excl. 2-way valves)

  • Cable management features for cable/hose winding and stowage

  • Supplied as standard with pressure gauge and a robust roll frame

2482020112811-Big.jpg

Pumps

HEP2 Pumps Specifications      
                   

Maximum Flow Rate inch3/min

Note:

1) All 380/440V models are suitable for operation at 50Hz and 60Hz.

2) All 110/115 and 220/240 volt models are supplied to run at 50 Hz as standard, refer to the table for pumps with 60 Hz motor. 60 Hz models deliver approximately 15-20% higher flow rate.

3) To order pumps with low voltage solenoid valve with hand pendant controller, suffix the pump model with 'S'

4) Other configurations are available on request